4 Zone Receiver

The Four Zone Receiver with relay outputs programs and supervises up to four transmitters. This receiver includes Form C relays for each output, allowing connection to any hardwired panel or stand-alone wireless application.

RATH® 4 Zone Receiver RC4204R

  • LEDs allow the user to view the current status of all four transmitters
  • Outputs can be configured in follower, latching, momentary, or toggle modes independently
  • Case tamper protection, jam detection, and internal antennas for a secure wireless implementation

  • Dimensions: 3.6” H x 6.5” W x 1.025” D
  • Weight: 9.9 oz
  • Power Requirement: 11-14vdc; 400mA
  • Output Specifications: Form C relay 1A @ 28vdc, 0.5A @ 30vac resistive load; N/O receiver case tamper contact closure, N/C receiver jam output indication
  • Input Specifications: A low is less than .5v; a high is greater than 2.5v
  • Reset Input: Contact closure, momentary low
  • Number of Points/Transmitters: Four
  • Number of Alarm Outputs: 4 Form C relay outputs
  • Number of Fault Outputs: 1 Form C relay output
  • Operating Environment
    • Temperature: 32°F to 140°F using internal battery
    • Humidity: Up to 90% (non-condensing)
  • EchoStream® Frequency: 902-928 MHz, frequency hopping spread spectrum
  • Regulatory Compliance: FCC, Industry Canada, RoHS, AS/