32 Zone Receiver

The 32 Zone multi-condition receiver with relay outputs programs and supervises up to 32 single or multiple condition transmitters. This receiver includes Form C relays for each output, allowing connection
to any hardwired panel or stand-alone wireless application.

RATH® 32 Zone Receiver RC4232MR

  • Two line text display shows condition of each transmitter, provides log of past events, and displays signal strength
  • Outputs can be configured in follower, latching, momentary, or toggle modes independently
  • Case tamper protection, jam detection, and internal antennas for a secure wireless implementation

  • Dimensions: 7” H x 8.75” W x 1.63” D
  • Weight: 18.4 oz
  • Power Requirement: 11-14vdc; 500mA
  • Output Specifications: Form C relay 1A @ 28vdc, 0.5A @ 30vac resistive load; N/O receiver case tamper contact closure, N/C receiver jam output indication
  • Input Specifications: A low is less than .5v; a high is greater than 2.5v
  • Reset Input: Contact closure, momentary low
  • Number of Points/Transmitters: 32
  • Number of Alarm Outputs: 11 Form C relay outputs
  • Number of Fault Outputs: 1 Form C relay output
  • Operating Environment
    • Temperature: 32°F to 140°F using internal battery
    • Humidity: Up to 90% (non-condensing)
  • EchoStream® Frequency: 902-928 MHz, frequency hopping spread spectrum
  • Regulatory Compliance: FCC, Industry Canada, RoHS, AS/NZS 4268:2008, UL 365, UL 636, UL 985, UL 1023, ULC/ORD-C1023-74, UL 1610, UL 1076