High Power Repeater

The RC5040-T High Power Repeater decodes and re-transmits signals from RATH® transmitters,
acting as a range expander for any EchoStream® transmission that it hears.
Several layers of repeaters can be employed to provide coverage of large facilities,
multi-story buildings, or sites with multiple buildings.
It is a line-powered device and includes an on-board lithium-ion battery for backup power.

RATH® High Power Repeater RC5040-T

  • Supervises for low battery, loss of line power, case tamper, back tamper, and jam detection
  • Incorporates sophisticated signal management
  • Includes backup battery
  • Includes power transformer
  • Self configuring
  • Case tamper protection

  • Dimensions: 3.5”H x 6.5”W x 1”D
  • Weight: 7.14 oz
  • Power Requirement: 14vac, 60Hz, 250 mA; transformer included
  • Battery Capacity: 3.6v, 2900mAhr
  • Typical Back-Up Battery Life: 24 hours
  • Operating Environment
    • Temperature: 32°F to 140°F (-4°F to 140°F for UL installations)
    • Humidity: Up to 90% (non-condensing)
  • EchoStream® Frequency: 902-928 MHz, frequency hopping spread spectrum
  • Check-In Time Frequency: 20 minutes
  • Regulatory Compliance: FCC, RoHS, UL2560